save your memories
Posts tagged Battery
Replacement Digital Camera Battery For CANON BP-512
Dec 25th
Replacement Digital Camera Battery For CANON BP-512
Specifications Part No: BP-512 Product ID: VCN008S Battery Type: Li-ion Volt: 7.4 V Capacity: 1500mAh Weight: 113.4g Dimension: 55.10×38.20×21.00mm Color: Silver Org. Price: AU $ 22.69 Promotion Price: AU $15.87 (inc. GST) CANON Digital Camera Battery Articles & Tips
A new CANON digital camera battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder CANON BP-512 may require three to four charge/discharge cycles before achieving maximum capacity. New CANON BP-512 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Digital Camera Battery pack in a fully charged staged for storage.When charging the CANON BP-512 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure
It is important to condition (fully discharge and then fully charge) the CANON BP-512 every two to three weeks. Failure to do so may significantly shorten the battery’s life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery’s power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user’s manual. If the battery will not be in use for a month or longer, it is recommended that CANON BP-512 be removed from the device and stored in a cool, dry, clean place.
Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder.
Be sure to store your Digital Camera Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your CANON BP-512 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
Upgrade my CANON Digital Camera Battery From Ni-MH to Li-ion
NiCad, Ni-MH and Li-ion CANON Digital Camera Battery is all fundamentally different from one another and cannot be substituted unless the Digital Camera has been pre-configured from the manufacturer to accept more than one type of battery chemistry. Please refer to your manual to find out which rechargeable battery types the laptop device supports or use our CANON Battery Finder above to find all the compatible Digital Camera Battery for your device. It will automatically list all of the battery chemistries supported by your specific device. If your device does allow you to upgrade the battery from Ni-MH to Li-ion, you will typically get longer run time.
For example, if your Digital Camera uses a NI-MH battery that is 9.6 Volts, 4000mAh and the new Li-ion Digital Camera Battery is 14.4 Volt, 3600mAh, then you will obtain longer run time with the Li-ion battery.
Example:
Li-ion: 14.4 Volts x 3.6 Amperes = 51.84 Watt Hours
Ni-MH: 9.6 Volts x 4 Amperes = 38.4 Watt Hours
The Li-ion is stronger and has longer run time.
How Can I Maximize the performance of My CANON Digital Camera Battery?
There are several steps you can take to help you get maximum performance from your Digital Camera Battery:
Prevent the Memory Effect – Keep the Digital Camera Battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.
Keep the CANON Digital Camera Battery Clean – It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.
Exercise the Battery – Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If an Digital Camera Battery has not been used for a long period of time, perform the new battery break in procedure described above.
Battery Storage – If you don’t plan on using the Digital Camera Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. NiCad, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.
What is The Run Time of Battery-Company.com.au’s Digital Camera Battery?
CANON Digital Camera Battery have two main ratings on them: Volts and Amperes. Because size and weight of Digital Camera Battery is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Mill amperes. One thousand Mill amperes equals 1 Ampere. When buying a battery, select batteries with the most Mill amperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together. For example:
14.4 Volts, 4000mAh (Note: 4000mAh is equal to 4.0 Amperes).
14.4 x 4.0 = 57.60 Watt-Hours
Watt-Hours signify the energy needed to power one watt for one hour. This CANON Digital Camera Battery can power 57.60 watts for one hour. If your laptop runs at 20.50 watts, as an example, this laptop battery could power your laptop for 2.8 hours.
Understanding Your CANON Battery Needs
We strive to make you Digital Camera Battery purchases easy. Since we understand that finding the right batteries for your needs can be overwhelming and confusing at times we developed an Digital Camera Battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics.
Disclaimer
The batteries supplied by our Company are [replacement for] sold for use with certain products of computer manufacturers, and any reference to products or trademarks of such companies is purely for the purpose of identifying the computer manufacturers with which our products [are replacement for] may be used. Our Company and this Website are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these computer manufacturers, nor are the products offered for sale through our Website manufactured by or sold with the authorization of the manufacturers of the computers with which our products [are replacement for] may be used.
eBattery.com.au specializes in
quality laptop battery, notebook battery,
camcorder battery, digital camera battery,
power tools battery, PDA battery,
game player battery, R/C helicopter battery,
battery charger & more laptop accessories.
Replacement Camcorder Battery For JVC BN-V11U
Dec 24th
Replacement Camcorder Battery For JVC BN-V11U
Specifications Part No: BN-V11U Product ID: VJV024 Battery Type: Ni-Cd Volt: 6 V Capacity: 1300mAh Weight: 198.45g Dimension: 89.35×46.20×18.90mm Color: Black Org. Price: AU $ 22.04 Promotion Price: AU $15.41 (inc. GST) JVC Camcorder Battery Articles & Tips
A new JVC camcorder battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder JVC BN-V11U may require three to four charge/discharge cycles before achieving maximum capacity. New JVC BN-V11U needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Camcorder Battery pack in a fully charged staged for storage.When charging the JVC BN-V11U for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure
It is important to condition (fully discharge and then fully charge) the JVC BN-V11U every two to three weeks. Failure to do so may significantly shorten the battery’s life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery’s power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user’s manual. If the battery will not be in use for a month or longer, it is recommended that JVC BN-V11U be removed from the device and stored in a cool, dry, clean place.
Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder.
Be sure to store your Camcorder Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your JVC BN-V11U in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
Upgrade my JVC Camcorder Battery From Ni-MH to Li-ion
NiCad, Ni-MH and Li-ion JVC Camcorder Battery is all fundamentally different from one another and cannot be substituted unless the Camcorder has been pre-configured from the manufacturer to accept more than one type of battery chemistry. Please refer to your manual to find out which rechargeable battery types the laptop device supports or use our JVC Battery Finder above to find all the compatible Camcorder Battery for your device. It will automatically list all of the battery chemistries supported by your specific device. If your device does allow you to upgrade the battery from Ni-MH to Li-ion, you will typically get longer run time.
For example, if your Camcorder uses a NI-MH battery that is 9.6 Volts, 4000mAh and the new Li-ion Camcorder Battery is 14.4 Volt, 3600mAh, then you will obtain longer run time with the Li-ion battery.
Example:
Li-ion: 14.4 Volts x 3.6 Amperes = 51.84 Watt Hours
Ni-MH: 9.6 Volts x 4 Amperes = 38.4 Watt Hours
The Li-ion is stronger and has longer run time.
How Can I Maximize the performance of My JVC Camcorder Battery?
There are several steps you can take to help you get maximum performance from your Camcorder Battery:
Prevent the Memory Effect – Keep the Camcorder Battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.
Keep the JVC Camcorder Battery Clean – It’s a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.
Exercise the Battery – Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If an Camcorder Battery has not been used for a long period of time, perform the new battery break in procedure described above.
Battery Storage – If you don’t plan on using the Camcorder Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. NiCad, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use.
What is The Run Time of Battery-Company.com.au’s Camcorder Battery?
JVC Camcorder Battery have two main ratings on them: Volts and Amperes. Because size and weight of Camcorder Battery is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Mill amperes. One thousand Mill amperes equals 1 Ampere. When buying a battery, select batteries with the most Mill amperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together. For example:
14.4 Volts, 4000mAh (Note: 4000mAh is equal to 4.0 Amperes).
14.4 x 4.0 = 57.60 Watt-Hours
Watt-Hours signify the energy needed to power one watt for one hour. This JVC Camcorder Battery can power 57.60 watts for one hour. If your laptop runs at 20.50 watts, as an example, this laptop battery could power your laptop for 2.8 hours.
Understanding Your JVC Battery Needs
We strive to make you Camcorder Battery purchases easy. Since we understand that finding the right batteries for your needs can be overwhelming and confusing at times we developed an Camcorder Battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics.
Disclaimer
The batteries supplied by our Company are [replacement for] sold for use with certain products of computer manufacturers, and any reference to products or trademarks of such companies is purely for the purpose of identifying the computer manufacturers with which our products [are replacement for] may be used. Our Company and this Website are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these computer manufacturers, nor are the products offered for sale through our Website manufactured by or sold with the authorization of the manufacturers of the computers with which our products [are replacement for] may be used.
eBattery.com.au specializes in
quality laptop battery, notebook battery,
camcorder battery, digital camera battery,
power tools battery, PDA battery,
game player battery, R/C helicopter battery,
battery charger & more laptop accessories.
Managing your Camcorder Battery
Dec 18th
Rechargeable camcorder battery can cost $40 or more, so knowing how to prolong the life of your battery and the perils of not caring for your battery properly saves you money as well as heartache from missed shots. First, you need the right battery for your camcorder. This is no big deal when you purchase your camcorder because a battery and charger are normally included in the purchase. The more you use your camcorder, though, the more you’ll notice that your battery doesn’t seem to stay charged as long as you would like or that it takes too long to recharge.
Now you have entered into the never-never land of camcorder rechargeable battery dilemmas. You ask yourself (because you don’t know who else to ask) the following questions:
Is it okay to partially charge a battery before taking it off the charger and putting it back in the camcorder?
Yes – providing you own a newer camcorder, such as a digital camcorder. Newer camcorder manufacturers typically provide lithium ion batteries. These batteries can be partially recharged before reuse. Other batteries – especially nickel-cadmium (NiCad) batteries – can be damaged by only partially charging them.
Is it okay to recharge a battery when some charge remains?
If it’s a lithium ion battery, yes. If it’s a NiCad battery, no.
How do you know when to purchase a new camcorder battery ?
Battery manufacturers generally consider a rechargeable battery to have reached its useful life when it can provide only about half of its original consumption. For instance, if your battery could originally provide an hour’s worth of power, you should replace it when it can provide only a half-hour’s worth.
You can save yourself a lot of trouble by purchasing an extra battery or two when you buy your camcorder. That way, you always have a backup in case the primary battery runs out of power. When purchasing batteries for your camcorder, consider the following:
Camcorder batteries have different specifications on how long they last. How much recording time relates to how much battery power?
Most professional camcorder operators tell you that the camcorder battery should be rated to operate for a period of time that’s twice that of the tape. Don’t assume that the battery that’s provided with your camcorder is the best battery for your circumstances. A manufacturer usually provides you with a battery that’s good for about an hour of camera usage. Because digital camcorder and Digital8 tape is usually 60 minutes long, you may think you have the correct battery, but chances are you don’t. Most people run their camcorders in the nonrecord mode as much as they do in the record mode because you can’t look through the viewfinder of a camcorder unless it’s turned on. So, if you’re using a 1-hour tape, you would be wise to use a 2-hour battery. Besides, a 2-hour battery is good for 2 hours only when it’s new. Within a year or so, your 2-hour battery will have become a 1-hour battery due to normal aging factors. This inevitable aging is accelerated if you don’t take proper care of your battery.
When buying a new battery, what type should I consider?
Always buy batteries that are made for your charger. And, obviously, always buy batteries that are rated for your camcorder. For example, the Canon GL1 is rated as 7.2 volts DC.
Caring for your camcorder battery doesn’t mean that you must have an emotional attachment. But you do need to discipline yourself to certain practices, or you’ll waste money and lose valuable shooting opportunities because you’ll be tending to sick batteries. Follow these basic guidelines, and your batteries should serve you well:
1. Never expose your batteries to elevated temperatures. The numero uno enemy of batteries is heat. Anton/Bauer claims that heat can accelerate your battery’s aging process by as much as 80 percent! Heat can also cause a lithium ion battery to lose its ability to hold a charge.
2. For long-term storage between uses (as in weeks), keep your batteries in the refrigerator. But before you nestle the batteries between the lettuce and rutabagas, put them (the batteries, that is) in a plastic bag to avoid the rare possibility of the battery seeping and causing food contamination.
3. Don’t put a cold battery on a battery charger! If you take a battery out of cold storage or out of a cold environment (such as your car in winter), always allow your battery to reach room temperature before charging. Batteries have been known to explode if placed on a charger while cold. Charging creates heat.
4. Don’t allow your batteries to jostle around while you’re carrying them. Jostling directly affects your battery’s life and performance. Also, never use a battery that has been physically damaged. The coating on the battery is supposed to keep the battery acid from seeping out. If the battery is damaged, these chemicals (which can be unstable and dangerous) can leak and cause damage to anything they touch.
lance
the webmaster of
camcorder battery
http://www.camcorder-battery-shop.com
Camcorder Battery Usage Tips(2)
Dec 15th
Camcorder Battery Usage Tips(2)
New camcorder needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a digital camcorder in a fully charged staged for storage.
Don’t short circuit terminal or store your digital camcorder with metal parts. Don’t connect and disconnect the camcorder within a short interval to prevent irregular charging of the rechargeable battery.
It’s okay to use different brands of digital camera batteries in the same device — for example, Energizer, Duracell, and generic. Voltage is voltage, and the device neither knows nor cares that made the camera batteries you put in it. Remember, you can mix brands but not types Camera Batteries self-discharge quicker when it’s hot. They’re fine at room temperature, but once it’s over 90o or so, they’ll start losing their charge faster. So don’t leave digital camcorder in a hot car.
Don’t overheat. Do not attempt to charge non-rechargeable batteries. This will overheat them and could cause a fire. Keep camcorder batteries out of hot places, like your car. Your car can be an oven, and baking your digital camcorder batteries shortens their life. Store properly. Keep your camera batteries in a cool, dry place. The refrigerator is cool, but not dry. You could store your camera batteries in the refrigerator and maximize their life by using a silica gel to keep the batteries dry. This however, is an expensive and inconvenient option.
Don’t short the connections. Keep your camcorder batteries organized. Don’t let the ends touch the wrong thing or you’ll short the digital camcorder battery.
Don’t mix and match your camcorder. Use the same chemistry and brand. Never mix rechargeable and non-rechargeable batteries. That’s very dangerous to you digital camcorder Invest in a good charger for your camcorder. NiMH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder.
more info:www.good-battery.co.uk
if you have any questions,pls feel free to contact www.good-battery.co.uk
Camcorder Battery Usage Tips
Dec 14th
# A new camcorder battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder battery may require three to four charge/discharge cycles before achieving maximum capacity.
# When charging the camcorder battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the digital camcorder battery from the device, reinsert it and repeat the charging procedure.
# It is important to condition (fully discharge and then fully charge) the camcorder battery every two to three weeks. Failure to do so may significantly shorten the battery’s life (this does not apply to Li-Ion batteries, which do not require conditioning). To discharge, simply run the device under the digital camcorder battery’s power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user’s manual.
# If the camcorder battery will not be in use for a month or longer, it is recommended that digital camcorder battery be removed from the device and stored in a cool, dry, clean place.
# The milliamp-hour (mAh) rating of the Hi-CapacityT camcorder battery will often be higher than the one on the original battery. A higher mAh rating is indicative of a longer lasting (higher capacity) battery and will not cause any incompatibilities. A Hi-CapacityT digital camcorder battery will, in most cases, outperform the original by 30% to 50%.
# New camcorder needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a digital camcorder in a fully charged staged for storage.
# Don’t short circuit terminal or store your digital camcorder with metal parts. Don’t connect and disconnect the camcorder within a short interval to prevent irregular charging of the rechargeable battery.
# It’s okay to use different brands of digital camera batteries in the same device — for example, Energizer, Duracell, and generic. Voltage is voltage, and the device neither knows nor cares that made the camera batteries you put in it. Remember, you can mix brands but not types
# Camera Batteries self-discharge quicker when it’s hot. They’re fine at room temperature, but once it’s over 90o or so, they’ll start losing their charge faster. So don’t leave digital camcorder in a hot car.
# Don’t overheat. Do not attempt to charge non-rechargeable batteries. This will overheat them and could cause a fire. Keep camcorder batteries out of hot places, like your car. Your car can be an oven, and baking your digital camcorder batteries shortens their life.